Troy-Bilt

ROLL PIN 1/4 X 11/8 HEAVY DUTY

Roll Pin 1/4 X 2-1/4 (Handlebar and Console Assembly)FITS MOWER MODELS:12A-750-190 833R, 12A-750-190 833R Wide Cut, 12A-751-190 933R, 12A-751-190 933R Wide Cut, 12AE750-190 833-E Wide Cut, 12AE750-190 833E, 12AE750-190 933E, 12AE750-190 933E Wide Cut

Roller Assembly, Horse Tillers Part 2084 for Horse I & II Tillers is no longer available. This part is the only replacement available. Other parts to consider: CP1051A: Roller Repair KitCP1131-1: Bushings .5 x .375 x .3 - Yoke Link (Need 4)CP2146: Bushings .5 x .75 x .325- Yoke to Engine Mount (Need 2)1133-1A: Adjustment Block for Horse I1920: Adjustment Block for Horse II and laterCP1122: Horse I Forward/Reverse SpringCP1492: Horse II Forward/Reverse Spring2163: Horse III...

ROLLER REPAIR KIT - FWD/REV LEVER - HORSE Other Parts to Consider: CP1131-1: Bushings .5 x .375 x .3 - Yoke Link (Need 4)CP2146: Bushings .5 x .75 x .325- Yoke to Engine Mount (Need 2)1133-1A: Adjustment Block for Horse I1920: Adjustment Block for Horse II and laterCP1122: Horse I Forward/Reverse SpringCP1492: Horse II Forward/Reverse Spring2163: Horse III and later Forward/Reverse SpringCP9323: Steel Slotted Spring Pin (Horse I & II Roller Assembly) ...

SCR-CURVED HD 5/16-18 X 2.0Replaces part numbers: 1731025, 710-1174, 9795, GW-9795

Screw- Hex, Flange - Handlebar Height Adjustment - Various Pony, Junior and Econo-Horse model tillers. This is a flange screw, not the bolt with the curved handle attached. The original 20703 part has been discontinued and replaced with the screw. Replaces Troy-Bilt part numbers:20703, 1186347,90046,710-04042

SCR-HXSKT FH 5/16-

SCREW - SOCKET HEAD - 1/4"-20 X 1.0"

TORX HEAD SCREW

SCR-HFLK 5/16-24 X .75 G5 ZP

SCREW-HEX WASH SF 1/4-20 X .5 REPLACES PART NUMBERS: 910-0599 710-0599 9552

SCREW-HEX 3/8-24 X 1 3/4Used on Engine Pulley for Techemseh Engines pnly on Horse I, Horse II, Horse III and some PTO Models.