MTD

TILLER TINE SHAFT - LATER HORSE TILLERS WITH STRAIGHT TINE SHAFT - DOES NOT INCLUDE CP1104 KEYStarts with serial number 120680100101 and up Parts to consider: 1901976 - Bronze worm gear - 30 teeth - 1" IDCP97074 - Roller BearingCP9623 - Straight tine shaft sealsCP1104 - Key Replaces Troy-Bilt/MTD part numbers:  1901972911-04082

Tapered shift knob - PTO - Horse III and later tillers.DOES NOT INCLUDE SCREW

Shift Lever Bracket (Hi-Lo) - for Horse TillersReplaces Troy-Bilt part numbers: 2149GW-21491900870001

PTO Transmission Dipstick - Horse Tillers with PTOReplaces Troy-Bilt part numbers: 2136GW-21361909157

Hi-Lo Shifter eccentric - Horse tillers. IF YOU HAVE A HORSE I OR II - 1027 and 1027A eccentrics used 2 o-rings and a shifter fork inside the transmission. The 1027A is discontinued, with the only available alternative being the updated 611-04003, which uses a shoe pin which rides inside of the slider gear in the transmission (in place of the shifter fork). To update your tiller you will need: 1442 shoe pin, 611-04003 eccentric, 1441 spring, 1440 washer, and 9611 (CP9622) eccentric seal....

KNOB-HANDLEREPLACES PART NUMBERS: 720-0279, 01002925, 01003131, 1766537, GW-1766537, 920-0279

SCREW-HEX 3/8-24 X 1 3/4Used on Engine Pulley for Techemseh Engines pnly on Horse I, Horse II, Horse III and some PTO Models.

SOLENOID W/HARDWARE - Please call to order and check on pricing and availability for this part.Replaces Troy-Bilt part numbers:96514099, gw-96514099, 96514, gw-96514 Fits various Big Red Models, Pony Tillers, and other machines. Please check your parts manual or model numbers before ordering.

ADAPTER-BLADE 7/8 - Genuine MTD old new stock. Discontinued in July 2011 by MTD. We have 5 left. REPLACES PARTS: 948-0323, 748-0323

WEAR PLATE (SICKLE BAR MOWER) - Old New Stock - Discontinued by MTD in December 2008. We have 4 left.FITS MODELS: 34032, 34033, 34034, 34035, 34061, 34062, 34063, 34064

Push Plug (Red) used on the transmission casing on various Horse Tillers.

Seal, Hi-Lo shift lever, Troy-Bilt "Horse" tillers 493014 and Above. All earlier tillers use our CP9603 O-Rings to seal the Hi/Lo lever. This is a OEM Part - .625 SHF X 1.0 BORE Replaces Troy-Bilt part numbers: 96119622921-04034